Sommario  Guida in linea MOBOTIX

Color Settings

Open the Color Settings dialog to adjust the color settings of the image sensors in order to optimize the camera for the lighting that is available.

Notes

Description of Parameters

Linked Image Control

If Linked Image Control is activated, the camera uses the same exposure values and internal image correction settings for both sensors. This ensures that the images from both sensors look as similar as possible.

Note

This parameter is only available for models with identical image sensors.

White Balance

Under certain lighting conditions, the color truthfulness of white areas may vary. White balance is used to correct this kind of color variation.

Select one of the following profiles for white balance:

Automatic WB (Extended)

Improvement of the classical automatic white balance. Delivers the best results in most cases and especially in critical lighting conditions.

Automatic WB (Classic)

This profile delivers good results in most situations.

Automatic WB (Warm Artificial Light)

Optimized profile of the classic automatic white balance for indoor situations with artificial lighting by fluorescent, halogen or incandescent (Tungsten) lamps (below 4000K).

Clear Blue Skylight

This profile corresponds to a source of light with a color temperature of 16000K. This kind of illumination is prevalent when the sky is clear and bright blue. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Twilight

This profile corresponds to a source of light with a color temperature of 10000K. This kind of illumination is prevalent shortly after sunset and shortly before sunrise when the sky is clear and bright blue. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Cloudy/Hazy

This profile corresponds to a source of light with a color temperature of 8000K. This kind of illumination is prevalent when the sky is very cloudy. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Outdoor

This profile corresponds to a source of light with a color temperature of 7000K. This kind of illumination is prevalent during the day outside of buildings. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Sunny

This profile corresponds to a source of light with a color temperature of 5500K. This kind of illumination is prevalent when the sun is shining brightly. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Morning Sun

This profile corresponds to a source of light with a color temperature of 5000K. This kind of illumination is prevalent when the sun is shining in the morning and in the evening. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Fluorescent Lamp

This profile corresponds to a source of light with a color temperature of 4000K. This kind of illumination is prevalent when many fluorescent lamps are used. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Halogen Lamp

This profile corresponds to a source of light with a color temperature of 3000K. This kind of illumination is prevalent when many halogen lamps are used. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Incandescent Lamp

This profile corresponds to a source of light with a color temperature of 2500K. This kind of illumination is prevalent when many incandescent lamps are used. If the automatic white balance does not deliver satisfactory results, try using this white balance profile.

Gray World

You can select this profile if the illumination of scene observed by the camera changes often. The camera tries to automatically adjust image color without actually knowing the color temperature of the light sources.

Note

The two profiles Automatic WB (Extended) and Automatic WB (Warm Artificial Light) are not available on all camera models.

Color Saturation

Color saturation controls the color intensity. The higher the saturation, the more intense are the colors. The value -10 produces a gray-scale image.

Automatic Saturation Control

This parameter allows reducing the perceived image noise by automatically adjusting the color saturation of images in dark scenes to the image brightness. The factory default setting is activated.

Note

This feature is not available on cameras with 1MP and 3MP image sensors.

Blue Balance

Controls the blue channel of the image.

Red Balance

Controls the red channel of the image.


Memorizzazione della configurazione

Fare clic sul pulsante Imposta per attivare le impostazioni e salvarle fino al prossimo riavvio della videocamera.

Fare clic sul pulsante Default per caricare i valori di default di questa finestra di dialogo (opzione non presente in tutte le finestre di dialogo).

Fare clic sul pulsante Ripristina per annullare le modifiche piĆ¹ recenti che non sono state memorizzate in modo permanente nella videocamera.

Fare clic sul pulsante Chiudi per chiudere la finestra di dialogo. Durante la chiusura della finestra di dialogo il sistema verifica eventuali modifiche nella configurazione. Se le rileva chiede di memorizzare in modo permanente l'intera configurazione.


© 2001-2022 MOBOTIX, · http://www.mobotix.com/